Hamilton Mercury Air - 4 Channel Wireless Switching System – Prisma Lighting
Hamilton Mercury Air - Prisma Lighting
  • Availability: in stock Many in stock Out of stock This item will be sent directly from the manufacturer and might take longer to arrive.

Hamilton Air 4 Channel Wireless Switching System

VAT included. Shipping calculated at checkout.

4 Channel Radio Receiver / Power Switch with Wireless Switch Plate Controller & Remote Control.

MWM-4CHPSKIT 4 channel IP rated wireless switching system can be used to control multiple lighting circuits, garden pumps and other electrical devices. An ideal and simple solution, enabling remote switching to open automatic gates and garage doors. This product is part of the Hamilton Air wireless accessories range, and can be controlled using the supplied 4 channel wall mounted switch plate radio transmitter or remote control throughout your home & garden.

  • Remote controlled 4-channel wireless switch receiver for switching on / off household electric appliances including: Lighting circuits, heaters, fans, air conditioners, pumps, garage doors, gates, barriers, optical and acoustic alarm signalling systems.
  • Includes 4 channel wall mounted switch plate MWM-4CHRT-WHW.
  • Includes 4 Channel Remote Control MWM4CHRC.

2 operating modes: On/Off & Timed

  • On/Off Mode: Device changes relay state each time the respective channel button is pressed.
  • Timed Mode: The circuit will connect for a pre-set time, of between 1 second and 4½ minutes. This is ideal for switching / activating motors e.g. Opening automatic garage doors and gates.
  • Each channel can be programmed and controlled independently.
  • This product can be used to control your existing wiring system and can be integrated with Hamilton’s Hamilton Lighting System to allow remote switching.
  • • IP56 Rated - Suitable for year-round outdoor use & designed to be mounted on an exterior wall.
  • Compatible with a variety of Hamilton Air wireless accessories.
  • Up to 113 controllers can be programmed to control this device.
  • This Hamilton Air 4 Channel Power Switch can be used to connect and control LED lamp lighting circuits.
  • Supplied with an integral aerial.
Tech Specs

Data Sheet.pdf

Primary Range Hamilton Air
Input Rated Voltage  230V AC 50 Hz
Power Output 4 circuits each rated at 5 amps, 1250 watts per circuit. Total pack load MUST not exceed 4000 watts. 
Power Consumption 5VA
RF Power 5mW
Relay Load 16 A / 250VAC / AC1 
Number Of Channels 4
Sensitivity 1,2u V(-105 dBm) Superheterodyne
Radio Transmission Encoded Operating Frequency 868,32 MHz
Antenna Integral aerial
Operating Range Up to 250m in the open area
Transmission Way Uni-Directional (Encoded)
Max. Number Of Wireless Controllers / Remote Controls Programmed 113
Optical Signalling Of Transmitters Operation LED red diode
Operating Position Vertical (Wall Mounted)
Casing Mounting Designed to be externally wall mounted using the supplied fixing kit.
Casing Protection Degree Weather proof IP56
Protective Class II
Dimensions 196 x 149 x 90mm
Ambient Operating Temperature -20˚C to +35˚C
Recommended Location IP56 Rated - Suitable for year round outdoor use
Standard / Approval EN 60669, EN 60950, ETSI EN 300 220 -1/2
Included Accessories MWM-4CHRT-WH-W Wall mounted 4 Chanel Wireless Switch Plate MWM-4CHRC 4 Channel Remote Control. (Both Require CR2032 batteries).