No Products in the Cart
Add colour to your installation with our RGBWW LED strip. Our tape has a 50:50 dedicated RGB chip and an independent 50:50 chip for a dedicated white 3000k warm white. Create pastel tones to your job by combining the white and colour chips for a different feel all together, With out full range of hand held, wall and phone controls we have everything you need to create your own stunning installation.
Cut Points |
Every 166mm |
Voltage
|
24 V
|
Wattage Per Metre
|
12W
|
Colour Temperature
|
RGB+3000K
|
IP Rating
|
IP33
|
LED's per Metre
|
72
|
Width
|
12 mm
|
Length
|
1-50 Metres
|
Colour Rendering Index
|
>=80
|
Warranty
|
3 years when used with and aluminium profile |
Product Code
|
ILSTRGBWA112E |
RATES |
TERMS |
COSTS |
---|---|---|
1-2 Day Delivery Monday-Friday (If Next Day Is Required, Please Contact Sales, Cut-Off for Next Day Is 1 pm) | — | £9.95 |
3-4 Day Economy Micro parcel Sevice Uk Mainland only | £0.00–£7.99 | £3.00 |
3-4 Day Economy Small parcel Sevice Uk Mainland only | £8.00–£19.99 | £4.50 |
3-5 Day Standard Shipping (Monday-Friday, UK Mainland Zone 1 Only) | £20.00–£79.99 | £6.95 |
Free Standard 3-5 Working Days Shipping (UK Mainland Zone 1 Only) | £80.00 and up | Free |
Yes, we certainly can! If an exact length is required, we can cut the tape/strip to fit the required length as close as possible. Please include your requirements in the notes section on the cart page. A member of our team will contact you shortly after the order to confirm the dimensions.
No. This product is designed to work with a low voltage 24V LED driver. You can purchase these separately in the product recommendations below.
Calculate the total wattage of the length of the LED strip being used, all wattage are shown in product titles per metre. We recommend to have an addition 20% extra wattage available so that the driver isn't running at full capacity.
We only recommend sticking this product to a aluminium LED Profile. This acts as a heat sink and prolongs the life of the LED strip.
Select the desired length of the LED strip, add the option for added power lead and then add to the cart. Repeat this process for each required length.