No Products in the Cart
Introducing the Mode 3 Type 2 to Type 2 charging cable - the perfect accessory for your electric vehicle. With a robust construction and end protectors, you can trust that this cable is built to last. It is suitable for use with 16 and 32A sockets and is specifically designed for use with Type 2 vehicles. This cable is also weather-resistant with an IP55 rating, so you can use it with confidence in any environment. Its 8m length gives you plenty of reach to reach your vehicle's charging port. Don't let a dead battery hold you back - get the Mode 3 Type 2 to Type 2 charging cable today!
Features:
| CODE : | EVS7GGR |
| TYPE : | Socket - Type 2 with auto-lock |
| COMMUNICATION : | Wi-Fi, 4G, RFID |
| DIMENSIONS : | 297 (H) X 223 (W) X 121 (D) MM |
| KW : | 7.4KW 32A MODE 3 |
| MIN CHARGE CURRENT : | CONFIGURABLE, 6 - 32A |
| ELECTRICAL INPUT : | 220-240V, 50-60Hz, SINGLE PHASE |
| COLOUR : | BASE & TRIM - RAL 9005 (BLACK) BODY - RAL 7016 (GRAPHITE GREY) |
| CABLE MANAGEMENT : | BUILT IN CABLE WRAP |
| PEN PROTECTION : | YES, IN-BUILT EARTH DISCONNECTION |
| EARTH ROD : | NOT REQUIRED |
| RCD PROTECTION : | YES, 6mA DC, 30mA TYPE-A, IN-BUILT |
| OVERLOAD AND FAULT PROTECTION : | OVER CURRENT AND FAULT PROTECTION |
| ELECTRICAL CLASS : | CLASS 1, HOUSING CLASS 2 |
| LOAD BALANCING : | YES, OPTIONAL ACCESSORY |
| CONSUMER UNIT REQUIREMENTS : | 40A MCB OR 30mA TYPE-A RCD (Dependent on cable type &/or route) |
| TERMINALS : | FIRST FIX PLUG CONNECTOR |
| INDICATOR : | RGB LED AND BUZZER |
| INDICATOR MODES : | BLUE - STANDBY, GREEN - CHARGING, YELLOW - NO NETWORK, RED - ERROR |
| HOUSING : | UV STABILISED POLYCARBONATE |
| WALL FIXING : | 4 point with horizontal and vertical adjustment, supplied fixing hole template |
| IP RATING : | IP55 |
| IK RATING : | IK10 |
| SOC MODULE : | AI ESP32-S SOC |
| ETHERNET : | RJ45 |
| WI-FI : | 2.4Ghz 802.11 b/g/n/e/i |
| BLUETOOTH : | YES |
| CONNECTION PROTOCOL: | OCPP 1.6J |
| APP AND BACK OFFICE : | SYNC EV |
| OPERATING TEMP : | -25 TO +40°C |
| SOFTWARE & FIRMWARE UPGRADE : | OVER-THE-AIR |
| WARRANTY : | 3 YEARS |
| STANDARDS & APPROVALS : | IEC61851-1, IEC61439-7, IEC 62955, IC 61851-21-2, BS EN62196, EN301 511, EN 301 908-1/2/13, EN 301 489-3, EN 300 330, EMC COMPLIANT, CE, UKCA, DEKRA CERTIFIED |
| SUPPLIED ACCESSORIES : | 5x base fixing caps, 5x assembly lid bolts, 1x blanking plug and 1x 25mm compression gland, user-side connector, cord grip and 2x cord grip assembly screws |
| ADDITIONAL : | BUILT-IN SPIRIT LEVEL |
Packaging Reuse: Minimizing Waste and Embracing Sustainability
