No Products in the Cart
Experience fast and convenient charging for your electric vehicle with the BG SyncEV wall charger. With a 7.4 kW output and 7.5 meters of cable, this tethered charger is equipped with everything you need to charge your EV efficiently. The Type 2 plug, WiFi, and Smart capabilities make this charger a functional and practical choice. Plus, our wall charger comes with a three-year warranty and UK-based technical support for added peace of mind. Installation is quick and easy for installers, and you can trust the quality of our charger as it is certified by Dekra. Upgrade your EV charging setup with the BG SyncEV wall charger.
Is it necessary to use a CT Clamp?
Since most modern properties have high load demands and the installation of electric vehicles is becoming increasingly popular, it is highly recommended that the EV charger be connected to the incoming electrical supply using a CT Clamp. Due to BG SyncEV dynamic load balancing technology, the charger will only use the available load when it is free during the charging process, thus preventing the maximum demand from exceeding the fuse size incoming into the property.
Features:
A free lifetime of software updates over-the-air is available with WiFi connectivity
Smarter than ever! Connectivity via OCPP 1.6J
Up to 7.4 kW of dynamic charging
Integral open PEN conductor protection eliminates the need for an earth rod
A safe system with integrated earth fault protection (RCD) and PEN protection
With 7.5 meters of cable and a Type 2 connector, this is a tethered connection
| CODE : | EVT77G |
| TYPE : | TETHERED WITH TYPE 2 PLUG |
| CABLE : | 7.5 METRE, BLACK H07BZ5-F3x6mm² +2x0.5mm², TPU |
| COMMUNICATION : | Wi-Fi |
| DIMENSIONS : | 257 (H) X 202 (W) X 139 (D) MM |
| KW : | 7.4KW 32A MODE 3 |
| MIN CHARGE CURRENT : | CONFIGURABLE, 6 - 32A |
| ELECTRICAL INPUT : | 220-240V, 50-60Hz, SINGLE PHASE |
| COLOUR : | BASE & TRIM - RAL 9005 (BLACK) BODY - RAL 7016 (GRAPHITE GREY) |
| CABLE MANAGEMENT : | BUILT IN CABLE WRAP |
| PEN PROTECTION : | YES, IN-BUILT EARTH DISCONNECTION |
| EARTH ROD : | NOT REQUIRED |
| RCD PROTECTION : | YES, 6mA DC, 30mA TYPE-A, IN-BUILT |
| OVERLOAD AND FAULT PROTECTION : | OVER CURRENT AND FAULT PROTECTION |
| ELECTRICAL CLASS : | CLASS 1, HOUSING CLASS 2 |
| LOAD BALANCING : | YES, OPTIONAL ACCESSORY |
| CONSUMER UNIT REQUIREMENTS : | 40A MCB OR 30mA TYPE-A RCD (Dependent on cable type &/or route) |
| TERMINALS : | FIRST FIX PLUG CONNECTOR |
| INDICATOR : | RGB LED AND BUZZER |
| INDICATOR MODES : | BLUE - STANDBY, GREEN - CHARGING, YELLOW - NO NETWORK, RED - ERROR |
| HOUSING : | UV STABILISED POLYCARBONATE |
| WALL FIXING : | 4 point with horizontal and vertical adjustment, supplied fixing hole template |
| IP RATING : | IP55 |
| IK RATING : | IK08 |
| SOC MODULE : | AI ESP32-S SOC |
| ETHERNET : | RJ45 |
| WI-FI : | 2.4Ghz 802.11 b/g/n/e/i |
| BLUETOOTH : | YES |
| CONNECTION PROTOCOL: | OCPP 1.6J |
| APP AND BACK OFFICE : | SYNC EV |
| OPERATING TEMP : | -25 TO +40°C |
| SOFTWARE & FIRMWARE UPGRADE : | OVER-THE-AIR |
| WARRANTY : | 3 YEARS |
| STANDARDS & APPROVALS : | IEC61851-1, IEC61439-7, IEC 62955, IC 61851-21-2, BS EN62196, EN301 511, EN 301 908-1/2/13, EN 301 489-3, EN 300 330, EMC COMPLIANT, CE, UKCA, DEKRA CERTIFIED |
| SUPPLIED ACCESSORIES : | 5x base fixing caps, 5x assembly lid bolts, 1x blanking plug and 1x 25mm compression gland, user-side connector, cord grip and 2x cord grip assembly screws |
| ADDITIONAL : | BUILT-IN SPIRIT LEVEL |
Packaging Reuse: Minimizing Waste and Embracing Sustainability
